Product Introduction
SF-ZMJ type pressure steam sterilizer (B level) is the latest research and development of our company's large-scale steam sterilization equipment, has been awarded a national appearance, four utility model patents, two invention patents in the trial.
Injectable working mode pressure steam sterilizer has the following advantages:
Injectable working mode pressure steam sterilizer has the following advantages:
1, the sterilization chamber does not need to install the heater also do not need to inject water, reducing the chamber leakage failure and the end of the work due to sewage reflux caused by pipeline clogging and damage to the device.
2, exclude the traditional conventional vertical pressure steam sterilizer chamber heating tube easy to damage the problem, but also solved the plague of conventional sterilizers easy to occur heating tube dry burning problem.
3、Reduce the working water consumption, the lowest working water consumption is less than 700 ml (unloaded).
4, the thermal efficiency is very high, more energy-saving and environmentally friendly, rapid heating and pressurization.
5, liquid load sterilization: liquid sterilization program is over, no need to wait, you can quickly take out the liquid load for the majority of researchers to use, for the majority of science and technology workers to save a lot of valuable time! At the same time glassware is not easy to break.
6, fabric wrapped sterilization procedures directly after the end of drying, without the need to put into the drying oven drying, reduce the probability of re-contamination of the sterilized spare parts.
7, the sterilization temperature inside the sterilization room is very uniform, the same time the temperature difference between the points is only a fraction of a degree.
3、Reduce the working water consumption, the lowest working water consumption is less than 700 ml (unloaded).
4, the thermal efficiency is very high, more energy-saving and environmentally friendly, rapid heating and pressurization.
5, liquid load sterilization: liquid sterilization program is over, no need to wait, you can quickly take out the liquid load for the majority of researchers to use, for the majority of science and technology workers to save a lot of valuable time! At the same time glassware is not easy to break.
6, fabric wrapped sterilization procedures directly after the end of drying, without the need to put into the drying oven drying, reduce the probability of re-contamination of the sterilized spare parts.
7, the sterilization temperature inside the sterilization room is very uniform, the same time the temperature difference between the points is only a fraction of a degree.
Product details